This guide walks you through the full process of calculating Besselian elements from scratch. These steps allow you to generate accurate eclipse geometry - and therefore, the Besselian elements - based on raw ephemeris data for the Sun and Moon. This data will be fed into the process described for the Vandermonde matrix.
Time-scale clarification (18 October 2026): Following the 28th CGPM Resolution 5, adopted 15 October 2026, continuous UTC is scheduled to begin 20 May 2027. UTC is civil clock time; UT1 tracks Earth's rotation. For the current TAI − UTC offset of 37 seconds, TT − UTC = 69.184 seconds, while ΔT = TT − UT1 remains necessary for Earth-rotation calculations. The Besselian elements remain expressed as functions of TT; this clarification does not alter the generator's μ convention.
You can, of course, use any ephemeris you like. The author has always found the data from IMCCE to be easy to use, as well as of course being highly accurate. If you choose to use it, then visit the IMCCE ephemeris generation form: https://ssp.imcce.fr/forms/physical-ephemeris
To get the data you need, repeat the following process twice: once for the Sun and once for the Moon.
2026-08-12T15:00:00.000. And mind the date! If your (\( t_0 \)) is 02:00:00.000, for instance, then three hours before that will land on the previous calendar date.CSV with decimal degrees selected for angles.
(This is REALLY important!) And PLEASE make sure you LOOK at the value for RA before you export it, as you will have to adjust the RA if it comes through in your CSV as
decimal hours instead of degrees. (Hours * 15 = Degrees)In the exported CSV, verify that the 7th row (the middle one) corresponds to your exact \( t_0 \). This ensures that you started with the correct time when you established the table of values.
Now, you will do all of the following steps for each of the 13 times you obtained the empheris data for. (This process is derived directly from the 2013 edition of the Explanatory Supplement.)
Convert the geocentric distances to Sun (\( \odot \)) and Moon (\( \text{☾} \)) from au to Earth radii. We use an equatorial radius for Earth of 6378.1366km, and the definition of the au as 149 597 870.7km.
\[ D_{\text{⊕}} = D_{\text{au}} \times \frac{149597870.7}{6378.1366} = D_{\text{au}} \times 23454.793 \]
This will give us \( D_{\odot} \text{ and } D_{\text{☾}} \text{.} \)
ONLY IF the RA came through as decimal hours, convert it from hours to decimal degrees. In what follows, we will assume you have this in degrees.
\[ \alpha_{\text{deg}} = \alpha_{\text{hours}} \times 15 \]
For both the Sun and Moon, calculate:
In each case, of course use the distance, RA and dec for one body at a time. Don't forget to convert the arguments to radians if your programming language requires it!
Obtain the components and magnitude of the vector G from the Moon to the Sun:
\[ G_x = x_{\odot} - x_{\text{☾}}, \quad G_y = y_{\odot} - y_{\text{☾}}, \quad G_z = z_{\odot} - z_{\text{☾}} \]
\[ |G| = \sqrt{G_x^2 + G_y^2 + G_z^2} \]
When calculating an observer's position or local circumstances, convert TT to UT1 using ΔT and calculate Greenwich Mean Sidereal Time using Jean Meeus' formula:
\[ T = \frac{JD_{\mathrm{UT1}} - 2451545.0}{36525} \]
\[ \theta_{\mathrm{UT1}} = 280.46061837 + 360.98564736629 \cdot (JD_{\mathrm{UT1}} - 2451545.0) + 0.000387933 \cdot T^2 - \frac{T^3}{38710000} \]
Normalize the result to [0°, 360°]. This UT1-based calculation is for Earth rotation during local-circumstance calculations. The generator's exported μ coefficients do not include ΔT and remain unchanged when ΔT changes.
In the equations that follow, boxed variables are Besselian elements.
\[ \boxed{d} = \arcsin\left(\frac{G_z}{|G|}\right) \]
\[ a = \operatorname{atan2}(G_y, G_x) \]
The generator exports \(\boxed{\mu}\) as a shadow-axis hour-angle polynomial independent of ΔT. Apply ΔT when using the exported elements to calculate Earth-fixed positions and local circumstances. The UT1-based angle in Step 6 must not be substituted directly into the exported μ coefficients.
VERY IMPORTANT: If your programming language requires the arguments of atan2 in (x,y) order, put them in that order. Convert radians to degrees where needed.
Compute the Moon’s coordinates in the fundamental plane:
\[ \boxed{x} = r \cdot \cos(\delta) \cdot \sin(\alpha - a) \]
\[ \boxed{y} = r \cdot \left[ \sin(\delta) \cdot \cos(d) - \cos(\delta) \cdot \sin(d) \cdot \cos(\alpha - a) \right] \]
\[ z = r \cdot \left[ \sin(\delta) \cdot \sin(d) + \cos(\delta) \cdot \cos(d) \cdot \cos(\alpha - a) \right] \]
Compute the geometric parameters of the umbral and antumbral cones using the apparent angular radii of the Sun and Moon, both measured from the Earth's center.
Note: These updates affect the computed edges of the eclipse path. The interested individual may substitute different values and compare the changes to the location of the eclipse path edges accordingly.
The cone angles formed by the external and internal tangents to the Sun and Moon disks are computed as:
\[ \sin(f_1) = \frac{R_{\odot} + k}{|G|}, \quad \sin(f_2) = \frac{R_{\odot} - k}{|G|} \]
Here, \( |G| \) is the center-to-center geocentric distance between the Sun and Moon (computed in Step 5). These angles define the geometry of the umbral and antumbral cones.
Use these to calculate the Besselian elements of \( \boxed{\tan(f_1)} \) and \( \boxed{\tan(f_2)} \). Use the identity \(\tan\theta = \frac{\sin\theta}{\sqrt{1 - \sin^2\theta}} \)
Next, compute the intercepts of the cone boundaries along the z-axis:
\[ c_1 = z + \frac{k}{\sin(f_1)}, \quad c_2 = -\frac{k}{\sin(f_2)} \]
Then calculate the projected semi-widths (or radii) of the cones at the fundamental plane:
\[ \boxed{l_1} = c_1 \cdot \tan(f_1), \quad \boxed{l_2} = c_2 \cdot \tan(f_2) \]
With your thirteen values of these eight variables, You're now ready to fit polynomials to derive and use these elements in eclipse path prediction or visibility analysis. Proceed to the section on the Vandermonde matrix.